Star Micronics TSP600 User Manual download pdf (Page 101)

– 98 –

APPENDIX

Appendix B: Dip Switch Setting

Two DIP switches are provided at the bottom of the printer, and can be set as given

in the table below. Be sure to set the power switch to off before changing the

settings. It is recommended to use a pointed item like a pen or flat-blade driver

screw to change the settings. The settings will become effective when the power

switch is set to on again.

The following is the procedure for changing the settings on DIP switches.

1. Make sure the printer is turned off.

2. Remove the screw from the DIP switch cover. Then take off the DIP switch

cover, as shown in the illustration below.

3. Set the switches using a pointed tool, such as a pen or flat-blade screwdriver.

4. Replace the DIP switch cover. Then secure it with the screw.

The new settings take effect when you turn on the printer.

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 112 113

No comments

Star Micronics TSP600 User Manual Page 101