Star Micronics SM-S401-DB38 Manual download pdf (Page 13)

- 12 -

2.5. Memory Switch Settings

1. Change the Memory switch by this operation. (Refer to Table 1).

MODE button : changing Printer MODE status

FEED button : changing OPTION status.

2. [Example] The defaults of the printer are :

Bluetooth/57600 bps/8 Data bit/No Parity/1 Stop bit/Density Medium

If a user wants to change the defaults with

RS-232C/9600 bps/7 Data bit/Even Parity/1 Stop bit/Density High

After pressing the MODE button simultaneously, if the ERROR lamp 5 turn

signals MODE button is converted with MODE functions

You will see the Power lamp twinkles once and the Error lamp twinkles

twice.

Press the MODE button once and the Error lamp twinkles once.

(The interface mode has set to RS-232C mode.)

Press FEED button once, Power lamp twinkles twice and Error lamp twin-

kles four times.

Press the MODE button twice, and the Error lamp twinkles once.

(The baud rate has set to 9,600 bps)

Press FEED button once, Power lamp twinkles three times and Error lamp

twinkles twice.

Press MODE button once, Error lamp twinkles once.

(The Data Bit has set to 7 Data bit)

Press FEED button once, Power lamp twinkles four times and Error lamp

twinkles once.

Press MODE button twice, Error lamp twinkles three times.

(The parity bit has set to even parity bit.)

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

No comments

Star Micronics SM-S401-DB38 Manual Page 13