Star Micronics SP2000 User Manual download pdf (Page 3)

1-1. Control Codes List

The following tables show the Star Mode commands that are supported by

this printer.

1-1-1. Character Selection

Control Hexadecimal Function Page

Codes Codes

<ESC> "R"

1B 52

Selects the international character set 7

<ESC> "/" "1" 1B 2F 31

Selects slash zero

<ESC> "/" <1> 1B 2F 01

<ESC> "/" "0" 1B 2F 30

Selects normal zero 7

<ESC> "/" <0> 1B 2F 00

<ESC> <GS> "t"

1B 1D 74

Selects the character code table 8

<ESC> "6" 1B 36 Selects character set #2 10

<ESC> "7" 1B 37 Selects character set #1 10

<ESC> "M" 1B 4D Selects the 7 X 9 (half dot) font (Default) 10

<ESC> "P" 1B 50 Selects the 5 X 9 (2 pulses per dot) font 11

<ESC> ":" 1B 3A Selects the 5 X 9 (3 pulses per dot) font 11

1B 20

Sets character spacing 11

<SO> 0E Sets the printing magnified double in

character width

<DC4> 14 Resets the printing magnified in

character width (Default)

1. Control Codes (Star Mode)

1 2 3 4 5 6 7 8 ... 80 81

No comments

Star Micronics SP2000 User Manual Page 3