Star Micronics SP2000 User Manual download pdf (Page 50)

2. ESC/POS Mode Commands

The following table lists the TM-U200 and TM-U300 emulation commands that

are supported by this printer.

2-1. Control Codes List

Control Hexadecimal Function TM- TM-

Codes Codes U200 U300

<HT> 09 Horizontal tab OK OK

<LF> 0A Line feed OK OK

<CR> 0D Prints and carriage return OK OK

<DLE> <EOT> 10 04 Enables real-time status send OK

<DLE> <ENQ> 10 05 Real-time request to printer OK

<ESC> SP 1B 20 Sets size of space to right of character OK OK

<ESC> ! 1B 21 Enables batch print mode OK OK

<ESC> # 1B 23 Sets memory switch

<ESC> % 1B 25 Enables/disables download OK OK

character set

<ESC> & 1B 26 Defines download character OK OK

<ESC> * 1B 2A Selects bit image mode OK OK

<ESC> - 1B 2D Selects/cancels underlining OK OK

<ESC> 2 1B 32 Selects 1/6-inch line spacing OK OK

<ESC> 3 1B 33 Selects n/144-inch line spacing OK OK

<ESC> = 1B 3D Selects peripheral device OK

<ESC> ? 1B 3F Cancels download character OK OK

<ESC> @ 1B 40 Initializes the printer OK OK

<ESC> D 1B 44 Sets horizontal tab position OK OK

<ESC> E 1B 45 Enables/disables emphasized mode OK OK

<ESC> G 1B 47 Enables/disables double-strike mode OK OK

<ESC> J 1B 4A Prints and n/144-inch paper feed OK OK

<ESC> K 1B 4B Prints and n/144-inch reverse paper feed OK OK

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 80 81

No comments

Star Micronics SP2000 User Manual Page 50