Star Micronics TSP1000 User Manual download pdf (Page 25)

– 21 –

7. Adjusting the Near-end Sensor

Use the following procedure to adjust the near-end sensor so it is compatible with

the size of roll paper you are using.

1 Open the printer cover.

2 Determine the diameter of the roll paper you are using and find the required

setting in the table below.

3 Insert the tip of a ballpoint pen or similar object into the hole of the adjuster,

and then push and side the adjuster to the desired setting.

When changing the setting, make sure that the position of the hole is aligned

with the alignment mark indicated by the arrow.

(Level 1) (Level 3)(Level 2)

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 51 52

No comments

Star Micronics TSP1000 User Manual Page 25