Star Micronics TSP1000 User Manual download pdf (Page 36)

– 32 –

No. 1

DIP-SW1

2 3 4 5 6 7 8

No. 1

DIP-SW2

2 3 4

B-1. Parallel Interface Model

ON ON

OFF OFF

DIP-SW 1

Switch

Function ON OFF

1-1 Command emulation

See table below

1-2 Command emulation

1-3

Should not be changed (Should be set to on)

1-4 Sensor adjustment Valid Invalid

1-5 Pin #31 (INIT) reset signal Valid Invalid

1-6 Handshaking conditions Offline or receive Receive buffer full

(conditions for BUSY) buffer full

1-7 Automatic status back function Invalid Valid

1-8 Should not be changed (Should be set to on)

The factory settings of DIP switch are all on.

Switch 1-1 Switch 1-2 Command emulation

ON ON Star Line Mode

OFF ON Star Page Mode

OFF OFF ESC/POS Mode

DIP-SW 2

Switch

Function ON OFF

2-1

2-2

Always ON Should be set to on

2-3

2-4

The factory settings of DIP switch are all on.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 51 52

No comments

Star Micronics TSP1000 User Manual Page 36