Star Micronics TSP1000 User Manual download pdf (Page 47)

– 43 –

Appendix F: Buzzer Driver Circuit

This printer is equipped with a circuit for driving the buzzer. A 6-pin modular

connector for connection of the buzzer is located on the back of the printer. To

connect to the drive circuit, connect the buzzer to the modular connector using a

cable supplied by you like that one shown in the figure below.

Important!

Never connect any other type of plug to the buzzer connector.

Modular plug

Modular plug: MOLEX 90075-0007,

AMP641337, or JAPAN BURNDY B-66-4

Shield

Wire lead

Pin No.

Signal

Function

I/O

name direction

1 FG Frame ground —

2 DRV1 Drive signal 1 OUT

3 +24V Drive power OUT

4 +24V Drive power OUT

5 N.C. Not connected —

6 N.C. Not connected —

1 2 ... 42 43 44 45 46 47 48 49 50 51 52

No comments

Star Micronics TSP1000 User Manual Page 47