Star Micronics TUP900 User Manual download pdf (Page 16)

Rev 0.01

TUP900 Series Specifications Manual

3-11

3-6 Paper Roll Supply Module

3-6-1 Paper Roll Holder

(1) Paper roll Support Method: Shaft Support Method Using the Paper roll Holder (Fixed Shaft Unit)

(2) Paper Tube: Inner Diameter φ1 Inch Paper Tube (φ25.4 ±1 mm)

Inner Diameter φ2 Inch Paper Tube (φ50.8 ±1 mm)

Inner Diameter φ3 Inch Paper Tube (φ76.2 ±1 mm)

Note 1) The accessory components must be replaced to use each of the paper tubes.

(3) Paper Width Adjustment: 79.5 ±0.5 to 111.5 ±0.5 mm Adjustable to any width.

3-6-2 Near-end Sensor

(1) Format: Reflective Type Photo-interrupter

(2) Width Direction Adjustment: 79.5 ±0.5 to 111.5 ±0.5 mm Adjustable to handle any width.

(3) Cable Length: 870 ±15 mm

Note 1) The near-end sensor cable length is determined according to the combination of optional

parts.

Remove the cable bundle when changing the layout of the printer or when using the optional

parts and printer unit. Also, be careful when removing the cable not to damage its insulating

cover.

(4) Residual Paper Amount (For Reference):

The residual amount to detect is adjusted by moving the near-end

sensor unit in the paper roll diameter direction.

See the following table regarding the paper roll that is detected by the

near-end sensor.

Also, see Fig. 8.5.2.A. for the applicable reference position.

Notes 1) See section 8.5 for details regarding the near-end sensor position.

2) The printer unit is adjusted to the reference position 'a' when shipped from the factory.

Table 3.6.2.3 Paper roll Sensor Diameter (For Reference)

Reference Position

Sensor Diameter

(Paper roll Outer Diameter)

Residual Paper Amount

(Calculated Value)

Reference 'a' φ41.5 8 m

Reference 'b' φ67.5 42 m

Reference 'c' φ93.5 93 m

Notes 1) The residual paper amounts described in the table above are for reference. Always check

that actual conditions of use to use this device.

2) Residual paper amounts described in the table above are for reference when using the

following types of paper roll.

Paper tube inner diameter: φ25.4

Paper tube outer diameter: φ32.4

Paper thickness: 65 µm

Star Micronics TUP900 User Manual Page 16

Comments to this Manuals

Star Micronics TUP900 User Manual Page 16

Comments to this Manuals

Related products and manuals for Label printers Star Micronics TUP900