Star Micronics NX-2420 User Manual Page 48
- Page / 92
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Switch B-l: Are you going to print on multi-part paper?
You can use up to 3-ply paper when this switch is ON. If you want to print
on 4-ply or 5-ply paper, set this switch to the OFF position.
Switch B-2: Do you want the printer to stop printing at the end of the paper,
or to keep printing?
When this switch is OFF the printer ignores the paper-out detector and prints
down to (and beyond) the bottom edge. Otherwise leave it ON.
Switch B-3: Do you want to advance paper automatically at the end of
printing?
You can select the Tear Off function with this switch OFF.
When using fanfold paper, the Tear Off function allows you to tear off one
sheet of paper without fully advancing the following sheet.
Switch B-4: This switch is used for technical purpose only. Leave this
switch ON.
Switch B-5: Which type of printing area do you want to use for single
sheets?
This printer can use two types of printing arca format for single sheets.
By putting the switch ON (“Type A”), the top of the first line of printing will
start l/6 inch from the top ofthe paper, and the printed area will end l/6 inch
from the bottom of the paper.
By putting the switch OFF (“Type B”), the first line of printing will start at
one inch from the top of the paper, and the printed area will end 6 mm from
the bottom of the printer.
-
Switches C-l and C-2: Which print mode do you want to set?
These switches sclcct the default print pitch and the fonts as shown below.
Print Mode
C-l c-2
1OCPI DRAFT
ON ON
1OCPI HS DRAFT ON
OFF
17CPI DRAFT
OFF ON
1 OCPI LQ
OFF OFF
NOTE: If you change these switches after you have stored the macro, these
settings will override the macro setting.
40
- NX-2420 1
- HOW TO USE THIS MANUAL 3
- FEATURES OF THE PRINTER 5
- TABLE OF CONTENTS 6
- Chapter 3 DEFAULT SETTINGS 7
- Chapter 8 SPECIFICATIONS 8
- Chapter 9 CHARACTER SETS 8
- COMMAND SUMMARY 8
- Chapter 1 9
- UNPACKING AND INSPECTION 10
- /den tifying printer parts 11
- Mounting the platen knob 12
- Automatic loading 18
- ON LINE 19
- Manual loading 20
- Paper parking 25
- Paper unparking 26
- LOADING MULTI-PART FORMS 27
- Adjustment lever 28
- Chapter 2 31
- ON LINE button 32
- PAPER FEED button 32
- SET/EJECT/PARK button 33
- PITCH button 33
- FONT button 34
- Short test mode 35
- Long test mode 36
- Print area test mode 37
- Stay in Panel Pitch 37
- Stay in Panel Font 37
- Hexadecimal dump 38
- Form feed 40
- Top of form 40
- Forward micro-feed 41
- Reverse micro-feed 41
- ON LINE > button 42
- Selecting the print color 43
- Store Macro Definition 43
- IBM mode, and vice versa 44
- Chapter 3 45
- 1 OCPI LQ 48
- “DRAFT” and “DRAFT COND” 51
- /RAFT cotm 0 : 52
- Chapter 4 53
- PRINTER CONTROL COMMANDS 53
- FONT CONTROL COMMANDS 54
- Select L Q characters 55
- Select LQ pica characters 55
- Select LQ elite characters 55
- Select LQ font 56
- Select font 56
- Select italic characters 57
- Select upright characters 57
- Emphasized printing 57
- Cancel emphasized printing 57
- Double-s trike printing 57
- Start underlining 58
- Stop underlining 58
- S tarf 0 verlining 58
- Stop 0 vet-lining 58
- Select score 59
- Select ornament character 59
- Superscript 59
- Subscript 60
- Select IBM character set 60
- Select character set #I 61
- Select character set #2 61
- Select IBM code page 62
- Select slash zero 63
- Select normal zero 63
- Pica pitch 63
- Elite pitch 63
- Semi-condensed pitch 64
- Condensed printing 64
- Cancel condensed printing 64
- Expanded printing 64
- Cancel expanded printing 64
- Select character width 65
- Select fixed spacing 66
- Select master print mode 66
- Increase character spacing 66
- Select character size 67
- Return to normal height 68
- Execute <ES& “cA” 71
- Line feed 71
- Reverse line feed 71
- Select forward feed mode 71
- Select reverse feed mode 71
- Feed paper n lines 72
- Set page length to n lines 72
- Set bottom margin 73
- Cancel bottom margin 73
- Form feed 73
- Disable paper-out detector 74
- Enable paper-out detector 74
- Set vertical tab stops 74
- Vertical tab 75
- Set left margin 76
- Set right margin 76
- Backspace 77
- Set left and right margins 77
- Carriage return 77
- Set automatic line feed 77
- Cancel automa tic line feed 77
- Left justify 78
- Center text 78
- Right justify 78
- Full justify 78
- Set horizontal tab stops 79
- Reset all tab stops 79
- Horizontal tab 79
- Relative horizontal tab 80
- GRAPHICS COMMANDS 81
- Se/ect graphics mode 82
- Seiecf graphics mode 83
- Convert graphics density 83
- Define download characters 84
- 27 56 0 n 0 lB3AOO nOO 86
- 27 37 49 IB 25 31 86
- 27 37 1 1B 25 01 86
- Select ROM character set 88
- I 18 I 90
- Stop printing 91
- Bidirectional printing 91
- Unidirectional printing 91
- Manual feed 92
- Auto feed 92
- Eject paper from ASF 92
- Reset printer 92
Related products and manuals for Print & Scan Star Micronics NX-2420
Print & Scan Star Micronics TSP552II User Manual
(113 pages)
(113 pages)
Print & Scan Star Micronics TUP400 User Manual
(103 pages)
(103 pages)
Print & Scan Star Micronics LC-15 User Manual
(130 pages)
(130 pages)
Print & Scan Star Micronics SP2000 User Manual
(170 pages)
(170 pages)
© 2020, manymanuals.com. All rights reserved. | 0.277 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals